High Power 12kW-GYRUS

High Power
12kW FM Amplifiers Broadcast Equipment
GYRUS 12/6

Modular RF for FM, Scientific & Pulse Applications:
Is an Air Cooled High Efficiency RF Amplifiers for Radio, TV, Scientific, Medical, Industrial and Military Application



TXM SMP© Superior Modular Philosophy

allows relevant advantages:

• The entire system benefit of the optimum characteristics of the base module VL Amplifier.

• The VL Amplifier are each of them a complete a functioning module with it’s own power supply ventilation, control logic and output filter, so, as the opposite of the standard plug-in transmitters bricke lives by themselves witch facilities the maintenance and the test: no need of special tools, each module can be connected and installed or tested as a single amplifier.

• Developping the VL Amplifier our engineers concentrate all the effort on: minimize weight, cost, power consumption and heat produced, and maximize: efficiency, reliability, electrical performance, connectivity and easy maintenance.

• A single VL Amplifier can be put on air as back-up of a bigger transmitter.

• Shock and vibration during the transportation process can compromise the result of an installation, optimizing the VL Amplifier package allow our engineers to meet the most demanding transport conditions for hermetic, temperature control and vibration and Shock Isolation.

During installation and maintenance, handled light packs help the health to operators.

The TXM SMP© Superior Modular Philosophy Is a family based on a very compact Amplifier and its variouscombinations. Thanks to a careful choice of size, 2 HE, power levels of the building blocks 2 kW FM, it can be considered as the New Reference for the modular transmitters.

The modularity is completed with special combiners, FM exciters and control logics.

FM exciter can be Analog or DDS both with integrated AES/EBU interface.


Combining System

•Compact and well isolated up to twelve way 20 kW PC Power Combiner, ultra-broadband, phase stable, low loss and showing more than 20 dB of additive harmonic filtering.

•Soft controlled sequential start-up reduce inrush current during OFF to ON transition.

•FM transmitters featuring only 800 mm rack depth and up to 40 kW FM in a single 19” rack.

•Digital TV Transmitters up to 8 KW Wide Band Doherty (WBD) output power in a single 19” rack.

Hardware and Software Protections

•Over and Under Voltage DC, Over and Under Voltage AC, RF and Power Supply Temperature, RF Coaxial 

Output Open or Short Circuit

•Capability of a long working time on Short/Open loads at all phase angles without any damage.

•Last generation 1400 W LDMOS, VSWR > 65:1 @ all Phase Angles, designed for enhanced ruggedness ISM applications and plasma generators.

• Integrated AC Mains filtering.

•Integrated lightning protection.

•Delayed energized of the system after Mains Power Blackout prevents against peaks and high variation voltages typical of this events.

•Soft controlled sequential start-up so to reduce the Inrush current during OFF to ON transition.

WEB/SNMP Telemetry and Remote Control

•Full Local or Remote control by by logon username and password.

• Remote control with Smartphones or Tablet.

• Host Logic and tele-measurement (TM, TC & TA).

• Remote control and monitoring via SNMP and/or WEB interface.

• With logbook or log file to record error or alarm message.

• Display of forward/reflection power value and reflection high alarm.

Human Interface

•Each module is equipped with a logic controller that allows full control by a local operator.

•All transmitter and amplifier parameters required for diagnostics can be retrieved locally or remotely via standard (IP) protocol and standard software (web browser, SNMP).

•Multilingual user guidance.

•High Definition, high contrast Color Oled display.

•Quick set of thresholds for protections level. This set is based on assignment of three “flavors” or PERSONALITIES:

Conservative (primary target = protect itself), Standard (balanced), Aggressive (primary target = transmission without interruptions).

N+1 and Backups systems

•Conventional standby systems such as: exciter standby,(n+1) Transmitter standby, passive standby and active output stage standby can be implemented.

•No additional control units are needed for the exciter standby and the active amplifier standby.

LD Tech HIGH Efficiency

• Very high efficiency (more than 75% for a complete 5 kW amplifier).

• Last LDMOS technology for power modules.

• Ultra High RF efficiency (>80 % typ.) software optimized for each power level.

• Lowest weight and dimensions in the industry.

• Lower device heating.

• Lower room heating.

• Lower space occupied.

• Lower maintenance needed.

• Small dimensions and low weight, reduce transportation costs and simplifying the logistic.

• Longer Component Lifespan.

• Reduced Electricity Costs.

• Lower Maintenance Costs.

• Reduced Cooling Costs.

• Fewer Fans.

Driver included on the VL Amplifier

• Maximum redundancy with virtual bottleneck elimination due to presence of a driver stage (LDMOS) on each plug.

• Low power exciter due to presence of a driver stage (LDMOS) on each plug.

• Low power splitters.

• No PA changeover required.

Power Supply Redundancy

• Maximum redundancy due to presence of a compact reliable power supply on each plug

• Highest reliability supply configuration.

• The SMP Module includes a very efficient AC-DC (typ > 95%) SMPS (Switch Mode Power Supply).

Electrical Characteristics

• Very high harmonics suppression (-90dB).

• Independent, individual APC (Automatic Power Control) circuit maintain a constant output power set.

• Frequency-response-compensated directional couplers and precision internal indicators.

• Distributed less binding Low Pass filter.

Maintenance Facility

• Power Unit and Amplifier Hot swapping: plugs can be extracted/inserted without switch-off the equipment.

• Zero-Current and Zero-RF Plug-in insertion/extraction system.

• Universal spare parts: each plug is phase and amplitude characterized.

• Worldwide available spare part for power Supply (GE-General Electric).

• Any VL amplifier can be interchanged with any other in the same TXM transmitter or with a spare. No adjustment or program of any kind are needed.

• Smart Air filter included easy to clean or replace.

• Zero-Current and Zero-RF Plug-in insertion/extraction system.

• 90% of spare parts shared between FM transmitters.

• Optimized Air Flow Paths avoid damages on the electronic boards.

• The path of the air inside the transmitter to avoid contact with the electronic boards.

• Tropicalizzation of all the components against dust, humidity and pollution.

• Exhaustive final quality test.




Power Output: Adjustable from 2kW to 40kW build with 2kW Amplifier Module up to 10 Modules in une Rack: 2kW = 1 Module, 4kW = 2 Modules, 6kW 3 Modules, 8kW 4 Modules, 10 5 Modules, 12 kW = 6 Modules, 16 kW 8 Modules, 20kW 10 Modules

Power higher than 20kW are build combining more racks amplifiers: 24kW = 2 Racks 6 Modules each rack, 32kW = 2 Racks 8 Modules, 40kW = 2 Racks 10 Modules.

Output power on/off and adjustable from front panel and remotely.

Overall Efficiency (Typical): ≥75% for transmitter.

RF Output Impedance: 50 ohm.

RF Output Connector: 1+5/8 and 3+1/8 type. (other on request)

Monitor RF: -57 dBc, BNC connector VSWR: 1.5:1 Maximum with automatic fold-back at higher VSWR











SCA Encoder

Digital Composite 192kHz Input

ELECTRICAL (for 10kW to 40kW Transmitter)

AC Input Power: 230/400 VAC ±15%, 50/60 HZ(+/- 3HZ)

single phase or 3-phase+N

Power factor > 0.98

Cooling: Forced air

MTBF > 20.000 Hours


Operating temperature: -10°C to +50°C.

Max Operating Altitude: 4000 mt.

Relative Humidity Range: 0 to 95% non condensing.

Protection against Lightening, Dust and Corrosion

PHYSICAL DIMENSIONS (For typocal 10kW Transmitter)

Mounting: 40 unit cabinet (Other size Rack on request)

Size: 570mm. (W) x 1000mm. D) x 1800 mm. (H) - Weight: ~ 220 Kg

Last Blog News

Guide to predict how many kilometers cover an FM Transmitter associated with the antenna system

Complete guide about selection of fm broadcast equipment and fm radio station equipment

How an FM transmitter helps covid 19 social distance with Drive-in theatre

The following guide describes the specifications to consider before purchasing and shows where to buy in your country or region. Let’s discuss some of the features that we found to be most important when searching for the best FM transmitters for your you Radio:

Luxury FM Radio Transmitters Made in Italy for professional use. Up to 80kW of soft, clean and crystal sound for your Radio Station TEKO Broadcast Distributor of main brands of Broadcast Equipment
See on the follows links related products surely of your interest:

Professional world-class Performance FM Broadcast Transmitters
Complete guide about selection of FM Broadcast Equipment and FM
Drive in movie theater fm transmitter: complete turnkey package
AXON Series Low Power FM Transmitters and Exciter 30W to 1200W
CORTEX Series High Power Modular FM Transmitters 2kW to 80kW
AXON 300 High Performance Stereo 300 watt FM Transmitter
AXON 1000 High Performance Stereo 1000W FM Transmitter
CORTEX 5/3 High Power Modular FM Transmitter
CORTEX 6/3 High Power Modular 6kW FM Transmitter
CORTEX 10/5 High Power Modular 10kW FM Transmitter


  • HOT PLUG-IN POWER SUPPLY for Instant replacement of the power supplies, easy maintenance, without off-air. The power supply plug-in modules can be safely removed from the front panel without interrupting the transmission.
  • SMP: Superior Modular Philosophy
  • MODULARITY with very light amplifier modules (less than 17kg/34lbs each)
  • Maximum Redundancy
  • Ultra compact size 2U for each amplifier module
  • DIRECT INTERNET CONNECTION: all the WIRED Line components have direct connection to internet without the help of any external box or accessories.
  • LOWEST LOST OF POWER OF THE MARKET IN CASE OF FAILURE OF ONE MODULE: Due to combination of 2kW amplifier modules, extremely low output power loss in case of failure.
  • TOTALLY MADE IN ALLUINUM: for minimum weight and robustness.
  • AIR PROTECTION: all the internal components are designed to avoid the direct contact with the air, mainly the air coming in from the fans, this avoid all the failures produced by the air corrosion.
  • MIRROR Network Mirror System:
  • TOUCH SCREEN BRAIN CONTROL UNIT: The control unit have the specific function to supervise the transmitter, even in case of failure of it (or turned off) manual control of the transmitter guarantee perfect operation.
  • Web control
  • Extremely detailed web control with all main parameters fully controllable and adjustable, available.
  • Weekly scheduler output power for energy consumption optimization management.
  • E-mails configuration available sent for any event.
  • Remotely upgradable